Sony HT-SF2300 Operating Instructions - Page 34

Watching a DVD/Blu-ray disc TV INPUT TV ?/1 SLEEP DMPORT AV ?/1 ?/1 2 SYSTEM STANDBY VIDEO1 VIDEO2 BD DVD SAT TV SA-CD/CD TUNER 3 2CH A.F.D. MOVIE MUSIC ?/1 1 4 7 >10 - CLEAR DISPLAY THEATRE 23 DVD/BD MENU 56 AUTO CAL D.TUNING 89 D.SKIP MEMORY AMP MENU 0/10 ENTER TOOLS/ OPTIONS MUTING TV VOL MASTER VOL O RETURN/EXIT MENU/HOME TV CH - TV CH + PRESET - REPLAY ADVANCE PRESET + .< > < TUNING - m TUNING + H M TV FM MODE X x 6 ACTIVE STANDBY 3 PRESET TUNING INPUT SELECTOR SOUND FIELD MUTING MASTER VOLUME AUTO CAL MIC 6 Notes • Refer to the operating instructions supplied with the TV and DVD player/Blu-ray disc player. • Check the following if you cannot listen to multi channel sound. - Be sure this receiver is connected to the DVD player/ Blu-ray disc player via a digital connection. - Be sure the digital audio output of the DVD player/ Blu-ray disc player is set up properly. Tips • Select the audio format of the disc to be played, if necessary. • You can select the sound field to suit the movie/music. Refer to page 46 for details. Recommended sound fields: Movie: C.ST.EX Music: CONCERT 1 Turn on the TV and DVD player/Blu-ray disc player. 2 Turn on the receiver. 3 Press DVD to watch a DVD or press BD to watch a Blu-ray disc. - You can also use INPUT SELECTOR on this receiver to select "DVD" or "BD". - (Models of area code CEL, CEK, AU, TW, TH only) Be sure to change the factory setting of the DVD input button on the remote so that you can use the button to control your DVD player. For details, see "Changing button assignments" (page 63). 4 Switch the input of the TV so that an image of the DVD/Blu-ray disc is displayed. If no image is displayed on the TV screen, make sure that the video output of the DVD player/Blu-ray disc player is connected to the TV. 5 Play back the disc. 6 Adjust to a suitable volume. 7 After you have finished watching the DVD/ Blu-ray disc, eject the disc and turn off the receiver, TV and DVD player/Blu-ray disc player. 34GB