Sony HT-SS370HP Operating Instructions - Page 16
HT-SF370 only, Installing the speakers on a flat, surface, speaker stand
View all Sony HT-SS370HP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installing the speakers on a flat surface HT-SF370 only Before you install the center speaker and the subwoofer, be sure to attach the supplied foot pads to prevent vibration or movement as shown in the illustration below. Installing the speakers on the wall You can install your speakers on the wall. 1 Prepare screws (not supplied) that are suitable for the hook on the back of each speaker. See the illustrations below. 3/16 in (4 mm) more than 1 in (25 mm) Note Attach the small foot pads to the center speaker and big foot pads to the subwoofer. Installing the speakers on the speaker stand For greater flexibility in positioning the speakers, you are recommended to use the speaker stand as below. Model Speaker stand HT-SF370 Supplied. For details, refer to the supplied Quick Setup Guide. HT-SS370 Optional WS-FV11 or WS-FV10D speaker stand (available only in certain countries). For details, refer to the operating instructions supplied with the speaker stand. 7/32 in (5 mm) 13/32 in (10 mm) Hook on the back of the speaker 2 Fasten the screws to the wall. The screws should protrude 7/32 in to 9/32 in (5 mm to 7 mm). HT-SF370 only For the center speaker 6 3/8 in (160 mm) 7/32 in to 9/32 in (5 mm to 7 mm) For the front speakers 7/32 in to 9/32 in (5 mm to 7 mm) 8 5/8 in (217 mm) 16US