Sony HTDDW700 Operating Instructions - Page 55

If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver's memory may remedy the problem (page 19). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver. If the problem persist Consult your nearest Sony dealer. Reference sections for clearing the receiver's memory To clear All memorized settings Customized sound fields See page 19 page 42 Specifications AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: (Models of area code U only) With 6 ohm loads, both channels driven, from 120 - 20,000 Hz; rated 85 watts per channel minimum RMS power, with no more than 0.7% total harmonic distortion from 250 milliwatts to rated output. Amplifier section Power Output1) Models of area code U (6 ohms 1 kHz, THD 10%) FRONT2): 133 W/ch CENTER2): 133 W SUR2): 133 W/ch (6 ohms 100 Hz, THD 10%) SUB WOOFER2): 135 W Models of area code CA (6 ohms 1 kHz, THD 0.7%) FRONT2): 85 W/ch CENTER2): 85 W SUR2): 85 W/ch (6 ohms 100 Hz, THD 0.7%) SUB WOOFER2): 85 W (6 ohms 1 kHz, THD 10%) FRONT2): 133 W/ch CENTER2): 133 W SUR2): 133 W/ch (6 ohms 100 Hz, THD 10%) SUB WOOFER2): 135 W 1) Measured under the following conditions: Area code Power requirements U, CA 120 V AC, 60 Hz 2) Depending on the sound field settings and the source, there may be no sound output. Additional Information continued 55US