Sony HVL-F32X Operating Instructions - Page 12

Mounting the flash continued - flash unit

Page 12 highlights

Mounting the flash (continued) 2 When using the digital still camera which is not compatible with the advanced accessory shoe * Connect this unit to the digital still camera with the supplied connection cord. Flashing section 2 1 3 4 5 1 Turn the rotating knob in the direction of the arrow to loosen. 2 Insert this unit into the accessory shoe towards the front, with the flashing section facing forward. 3 Turn the rotating knob in the direction of the arrow to tighten. 4 Attach the connection cord to the connection cord terminal of this unit. 5 Connect the connection cord to the ACC terminal of the digital still camera. * Depending upon the digital still camera being used, fix the connection cord by pressing it between the cord clamper. PNote Removing or attaching this unit to a digital still camera while the power is ON, or disconnecting the connection cord while the power is ON can cause the flash to fire erroneously. 12-GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

12-GB
Mounting the flash (continued)
2
When using the digital still camera which is not compatible
with the advanced accessory shoe
*
Connect this unit to the digital still camera with the supplied
connection cord.
1
Turn the rotating knob in the direction of the arrow to loosen.
2
Insert this unit into the accessory shoe towards the front, with the
flashing section facing forward.
3
Turn the rotating knob in the direction of the arrow to tighten.
4
Attach the connection cord to the connection cord terminal of this unit.
5
Connect the connection cord to the ACC terminal of the digital still
camera.
* Depending upon the digital still camera being used, fix the
connection cord by pressing it between the cord clamper.
P
Note
Removing or attaching this unit to a digital still camera while the power is ON,
or disconnecting the connection cord while the power is ON can cause the flash
to fire erroneously.
1
2
3
4
5
Flashing
section