Sony HVL-F60M Operating Instructions - Page 68
A] Wireless flash photography using, the HVL-F60M as the off-camera flash
View all Sony HVL-F60M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
[A] Wireless flash photography using the HVL-F60M as the off-camera flash Use only an off-camera flash unit, using the light from the built-in flash as a signal. Built-in flash HVL-F60M 1 Attach the flash unit to the camera and turn the power of the flash unit and camera on. 2 Set the camera's flash mode to wireless (WL). • The setting method differs depending on the camera used. For details, refer to the operating instructions of your camera. • When the camera is set to wireless flash, the flash unit also changes automatically to wireless and the WL RMT mode's normal indicator screen appears. The flash channel information is transmitted to the camera. (If the [WL CTRL] flash mode indicator is shown, change it to [WL RMT] on the MODE screen.) 3 Remove the flash unit from the camera and raise the built-in flash. • Make sure that the flash mode indicator on the LCD panel of the flash unit is showing [WL RMT]. 4 Select the wireless remote setting of the flash unit. • See page 71 for more details. • At this time, if the wireless remote setting is MANUAL REMOTE or MANUAL REMOTE 2 you can manually adjust the power level. (See the wireless remote setting table on page 72) GB 68