Sony HXCE-FB70 Operating Instructions - Page 10

Specifications General Power requirements AC 100 V - 240 V, 50/60 Hz Power consumption 1.5 A (max.) Inrush current (1) Maximum possible inrush current at initial switch-on (Voltage changes caused by manual switching): 37 A peak, 7 A r.m.s. (240 V AC) (2) Inrush current after a mains interruption of five seconds (Voltage changes caused at zero-crossing): 9 A peak, 3 A r.m.s. (240 V AC) Input/Output connector CAMERA: optical multi connector CCU: optical fiber connector Operating temperature 5°C to 40°C (41°F to 104°F) Storage temperature -20°C to +60°C (-4°F to +140°F) Dimensions 104 × 62 × 360 mm (4 1/8 × 2 1/2 × 14 1/4 in) (w/h/d, projecting parts are not included) Mass Approx. 2.3 kg (5 lb 1.1 oz) Warranty booklet (1) Optional Accessories CCFN-25/50/100 Hybrid Fiber Cable CCFN-JC1 Joint Adaptor United States and Canada: Plug holder B (2-990-242-01) Other areas: Plug holder C (3-613-64001) United States and Canada: Power cord set (1-551-812-XX) Other areas: Power cord set (1-782929-XX) Service manual Connectors for optical/electric composite cables: • NEUTRIK® opticalCON DUO (to the "CAMERA" connector on Power Supply Unit) • NEUTRIK® opticalCON DUO (to the "CCU" connector on CAMERA ADAPTOR) Caution on the optical/electric composite cable: For connection between a power supply unit and camera adaptor, be sure to use an optical/electric signal composite cable with the connectors specified in this manual in order to comply with the limit for EMC regulations. Design and specifications are subject to change without notice. Supplied Accessories Operating Instructions Japanese/English (1) CD-ROM (1) 10 Specifications