Sony HXRNX5R Brochure HXR-NX5R NXCAM Brochure - Page 3

Built-in LED lighting - hxr nx5

Page 3 highlights

Rich color imagery The NX5R offers latest generation imaging performance, with Full-HD progressive image capture rather than the interlaced output of the original HXR-NX5. Its three 1/2.8-type Full HD Exmor CMOS sensors provide 2.07 million effective pixel count at the 16:9 aspect ratio. Red, blue, and green light are independently captured by separate image sensors, contributing to high resolution, high sensitivity and wide dynamic range. An advanced LSI (featuring intelligent noise reduction, enhanced detail reproduction and distortion correction technologies) delivers remarkably life-like images. Built-in LED lighting Adjusting the brightness of the LED video light is easy and conveniently positioned just above the camcorder's built-in microphone, providing convenient illumination for a wide range of shooting situations and minimizing the need to carry external lighting equipment. Illumination is approximately 200 lux/1m (approx. 800 lux/0.5m) with a beam angle of 30° and a color temperature of approximately 5500K. * An external microphone connected via the XLR connector may cast a shadow if used simultaneously with the built-in LED video light. Minimum Maximum Diffuser 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8

Rich color imagery
The NX5R offers latest generation imaging performance, with Full-HD progressive image capture rather than the interlaced output
of the original HXR-NX5. Its three 1/±.8-type Full HD Exmor CMOS sensors provide ±.07 million effective pixel count at the 16:9 aspect
ratio. Red, blue, and green light are independently captured by separate image sensors, contributing to high resolution, high
sensitivity and wide dynamic range. An advanced LSI (featuring intelligent noise reduction, enhanced detail reproduction and
distortion correction technologies) delivers remarkably life-like images.
Built-in LED lighting
Adjusting the brightness of the LED video light is easy and conveniently positioned just above the camcorder’s built-in
microphone, providing convenient illumination for a wide range of shooting situations and minimizing the need to carry external
lighting equipment. Illumination is approximately ±00 lux/1m (approx. 800 lux/0.5m) with a beam angle of 30° and a color
temperature of approximately 5500K.
* An external microphone connected via the XLR connector may cast a
shadow if used simultaneously with the built-in LED video light.
Diffuser
Maximum
Minimum
²