Sony ICD-BP100 Primary User Manual - Page 48
Connecting the IC Recorder to Your, Computer
View all Sony ICD-BP100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Connecting the IC Recorder to Your Computer Connect the IC recorder to the USB connector of your computer using the supplied USB cable. Note Be sure to install the "Digital Voice Editor" Software before connecting the IC recorder to your computer. To the USB connector of your computer To IC recorder IC recorder USB connector Connecting cable (supplied) Your computer USB connecting cable can be connected or disconnected when the IC recorder and the computer are turned on or off. The IC recorder is recognized by the computer as soon as the cable is connected, enabling you to proceed with the operation. Notes • Do not connect more than two USB devices to your computer. Normal operation will not be guaranteed. • Use of this IC recorder with a USB hub or a USB extension cable is not guaranteed. • A malfunction may occur depending on the USB devices connected at any one time. • Check the remaining battery power of the IC recorder (more than one segment of the battery indicator should be on) before connecting the IC recorder to the computer. If the batteries are exhausted, communication between the IC recorder and the computer may not succeed. • We recommend you disconnect the cable from the computer when you do not use the Digital Voice Editor. 48GB