Sony ICF-DVD57TV Operating Instructions - Page 15

Playing the Radio Manual Tuning 1 Press RADIO ON/BAND [RADIO/BAND] to turn on the radio. "RADIO" appears in the Clock Display Window. The display shows the band and frequency for a few seconds and then changes back to the current time. 2 Press RADIO ON/BAND [RADIO/BAND] repeatedly to select the desired band. Each press changes the band as follows: 3 Press RADIO TUNE/TIME SET - , m(Fast reverse) or +, M(Fast forward) [TUNE/CH - or +] to tune in to the desired station. Two short beeps sound when the minimum frequency of each band is received during tuning. 4 Adjust the volume using VOLUME [VOL] + or -. To check the station being received Press RADIO ON/BAND [RADIO/BAND] lightly. The Clock Display Window shows the band and frequency for a few seconds and then changes back to the current time. To turn off the Radio Press OFF. Switching between monaural and stereo The radio is set for stereo reception at the default setting. If FM stereo reception is poor, set to "FM MONO (monaural)." Noise will be reduced although the sound will not be heard in stereo. 1 Press RADIO ON/BAND [RADIO/BAND] to turn on the radio. 2 Press RADIO ON/BAND [RADIO/BAND] repeatedly to select FM. 3 Press MODE/SCREEN SIZE. "Mono(monaural)" or "ST(Stereo)" appears in the Clock Display Window. Each time you press MODE/SCREEN SIZE, the mode changes to either "Mono" or "ST." 4 Select Mono or ST. The mode you select appears in the Clock Display Window for a few seconds and returns to the current time. 15