Sony ICF-SW7600GR Operating Instructions - Page 16

Directly entering the frequency - Direct tuning If you know the frequency of the station you want to listen to, you can use the number buttons for quick and accurate tuning. 1 4 3 5 2 TVOLUME (adjust the volume) 1 Press POWER ON/OFF to turn on the radio. 2 Press FM/AM to select either band. To listen to SW (short wave), MW (medium wave) or LW (long wave) broadcasts, select AM. 3 Press DIRECT. The frequency disappears from the display. Perform Step 4 within 10 seconds. Otherwise, the unit will return to the condition prior to Step 3. In this case, repeat from Step 3. In addition, perform steps after Step 4 within 10 seconds as well. 4 Press the number buttons and input the frequency of the desired station. FM band: You can ignore the decimal point. Example: To enter 89.5 MHz, press 8, 9 and 5. AM band: You can ignore the last 3 digits if they are all zero. Examples: To enter 810 kHz, press 8, 1 and 0. To enter 10 000 kHz, enter 1 and 0. To enter 12 095 kHz, enter 1, 2, 0, 9 and 5. The minimum frequency step for direct input is 0.05 MHz (50 kHz) for FM and 1 kHz for AM. 5 Press EXE. The unit will tune in to the entered frequency. " TUNE " will appear in the display when the station is tuned in. 16GB Listening to the radio