Sony ICFC414 Operating Instructions - Page 1

4-135-644-21(1) FM/AM CLOCK RADIO Operating Instructions Mode d'emploi (au dos) ICF-C414 Dream Machine is a trademark of Sony Corporation. Dream Machine est une marque de fabrique de Sony Corporation. No Power No Problem is a trademark of Sony Corporation. No Power No Problem est une marque de fabrique de Sony Corporation. ©2009 Sony Corporation Printed in China Battery compartment AC power cord There is a tactile dot above the VOLUME dial to indicate which way turns the volume up.     English WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To reduce the risk of fire, do not cover the ventilation of the apparatus with newspapers, tablecloths, curtains, etc. And do not place lighted candles on the apparatus. To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose the batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like for a long time. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Features  Large, easy to-see, 1.4 inch green LED.  Dual alarm FM/AM Clock radio.  Various types of alarms - buzzer, radio and melody.  Automatic time set - When you plug the clock in for the first time, the current time will be shown in the display.  Automatic Daylight Saving Time/Summer time adjustment.  Date button to display month, day and year.  Brightness control (High/Middle/Low).  No Power No Problem™ alarm system to keep the clock and the alarm operating during a power interruption with a CR2032 battery installed.  Extendable snooze - Snooze time can be extended from 10 up to 60 minutes.  Progressive Alarm Speed (buzzer only). About the backup battery To keep good time, as backup power source, this unit has one CR2032 battery inside of the unit in addition to the house current. The battery keeps the clock and the alarm operating in the event of a power interruption. Note for customers in Canada The clock is preset at the factory, and its memory is powered by the preinstalled Sony CR2032 battery. If the "AM 12:00" appears on the display when the unit is connected to AC outlet for the first time, the battery may be weak. In this case, consult a Sony dealer. The preinstalled CR2032 battery is considered part of the product, and is covered by the warranty. You are required to show "Note for customers in Canada" (in this instruction) to a Sony dealer in order to validate the warranty for this product. Knowing when to replace the battery When the battery becomes weak, the "" indicator appears in the display. In the event of a power interruption when the battery is weak, the current time and alarm will be initialized. Replace the battery with a Sony CR2032 lithium battery. Use of another battery may present a risk of fire or explosion. Installing and replacing the backup battery 1 Keep the AC plug connected to the AC outlet, remove the screw that secures the battery compartment at the rear of the unit using a screwdriver, and remove the battery compartment (See Fig. -). 2 Insert a new battery in the battery compartment with the  side facing up. To remove the battery from the battery compartment, push it out from the side marked PUSH (See Fig. -). 3 Insert the battery compartment back into the unit and secure it with the screw (See Fig. -). 4 When you are replacing the battery, press RADIO ON to turn the "" indicator off in the display. Notes  If you replace the battery, do not disconnect the AC plug from the AC outlet. Otherwise, the current time and alarm will be initialized.  Be sure to observe the correct polarity when installing the battery. Setting the clock for the first time This unit is preset to the current date and time at the factory, and is powered by the back up battery. All you need to do is just plug it in and select your time zone. 1 Plug in the unit. First, the month and date appear, then the year, and then the current Eastern Standard/ Daylight Time appears in the display. 2 Press TIME ZONE. Area number "2" appears in the display. If you live in the Eastern Time zone, you do not need to adjust the area setting. Area number Time zone 1 Atlantic Standard/ Daylight Time 2 (default) Eastern Standard/ Daylight Time 3 Central Standard/ Daylight Time 4 Mountain Standard/ Daylight Time 5 Pacific Standard/Daylight Time 6 Yukon Standard/Daylight Time 7 Hawaiian Standard/ Daylight Time 3 Press TIME ZONE repeatedly until the desired number appears. The display returns to the clock about 4 seconds after the operation is complete. Note During the shipment and your first use, a clock error may occur. In this case, refer to "Setting the clock and date" to set the correct time. When daylight saving time (summer time) begins This unit employs Automatic Daylight Saving Time/Summer Time adjustment. The DST indicator appears in the display at the beginning of the daylight saving time (summer time), and disappears at the end of it.  Daylight saving time begins at: 2:00 AM on the second Sunday of March.  Standard time begins at: 2:00 AM on the first Sunday of November. To cancel the automatic DST/summer time adjustment and to set DST display manually The automatic DST/summer time adjustment can be cancelled. Press and hold DST for at least 3 seconds while the clock is displayed. A beep sounds, and "Aut  OFF" appears in the display to show that the automatic DST/summer time adjustment is cancelled. The display returns to the clock. Notes  Daylight Saving Time depends on the law in each country/region, and your area may not use it. In such a case, cancel the automatic DST/ summer time adjustment before using the set and set the time manually as necessary.  To activate the automatic DST/summer time adjustment again, press and hold DST for at least 3 seconds. A beep sounds, and "Aut  On" appears in the display to show that the automatic DST/summer time adjustment is activated. The display returns to the clock.  To change the display to the daylight saving time (summer time) manually, see "To change the display to the daylight saving time (summer time) indication." Setting the clock and date To change the setting manually, follow the procedure from step 1. 1 Press CLOCK for at least 2 seconds. You will hear a beep and the year will start to flash in the display. 2 Press + or - until the correct year appears in the display. 3 Press CLOCK. 4 Repeat steps 2 and 3 to set the month, day and time. After setting the time, two short beeps sound and the clock starts from 0 seconds.  Pressing and holding + or - changes the year, month or day rapidly. When setting the current time, time changes rapidly by 1 minute-increments up to 10 minutes, and then by 10 minute-increments.  While setting the clock, you must perform each step within 65 seconds, or the clock setting mode will be cancelled. To display the year and date Press SNOOZE/DATE/SLEEP OFF once for the date, and within about 3 seconds press it again for the year. The display shows the date or year for about 3 seconds and then changes back to the current time. If you connect the AC plug to an AC outlet while this unit is powered from the backup power source, the current date and time appears in the following order (the same as when the unit is powered on after a power interruption). "month and date" (about 1 second)  "year" (about 1 second)  "current time" To change the display to the daylight saving time (summer time) indication Change the daylight saving time (summer time) adjustment setting according to the following procedures if you have cancelled the automatic DST/summer time adjustment. Press DST. The DST indicator appears in the display and the time indication changes to the daylight saving time (summer time). To deactivate the daylight saving time (summer time) adjustment, press DST again. Setting the brightness of the display Three levels of brightness are available by pres­­sing BRIGHTNESS. Playing the radio 1 Press RADIO ON to turn on the radio. 2 Adjust the volume using VOLUME. 3 Select BAND. 4 Tune in to a station using TUNING. To turn off the radio Press RADIO OFF/ALARM RESET. Improving the reception FM: The AC power cord functions as an FM antenna. Extend the AC power cord fully to increase reception sensitivity. AM: Rotate the unit horizontally for optimum reception. A ferrite bar AM antenna is built-in to the unit.  The alarm buzzes for about one minute, stops temporarily, and will buzz again after about five minutes if neither SNOOZE/DATE/SLEEP OFF or RADIO OFF/ALARM RESET are pressed while the alarm is buzzing. If the alarm buzzes and stops (either automatically after 1 minute or by pressing SNOOZE/DATE/SLEEP OFF) five times, the alarm is automatically reset in the case of a power interruption. The alarm will buzz for 30 minutes (or until turned off) after power is resumed if the power is resumed within 60 minutes from the alarm time.  If you press SNOOZE/DATE/SLEEP OFF while the alarm sounds, the snooze time is set to 10 minutes. During a power interruption, snooze time cannot be set to more than 10 minutes.  If the "" indicator appears in the display, the alarm will not work in the event of a power interruption. Replace the battery if the "" indicator appears. Do not operate the unit over a steel desk or metal surface, as this may lead to interference of reception. Setting the alarm The dual alarm function allows you to set two alarm programs (ALARM A and ALARM B). The alarm time can be set for each program and the alarm sound is selectable from buzzer, radio or melody. Notes  Before setting the alarm, make sure to set the clock (see "Setting the clock and date").  The factory set alarm time is "PM 12:00".  To set the radio alarm, first tune in to a station and adjust the volume (see "Playing the radio"). To set the alarm time 1 Set ALARM A (or B) to the desired alarm sound ( (buzzer), RADIO or MELODY). The alarm time appears for a few seconds, and then the ALARM A (or B) indicator lights up in the display. (It does not appear when the switch is set to OFF.) When you set the alarm to MELODY, the alarm sounds the melody- "Spring" from "The Four Seasons" by Antonio Lucio Vivaldi. 2 Press ALARM TIME SET A (or B) + or - to set the desired time. Each press of ALARM TIME SET A (or B) + or - changes the indication by 1 minute. If you press and hold ALARM TIME SET A (or B) + or -, the alarm time goes forward (or backward) by 1 minute up to 10 minutes, and then by 10 minutes increments. While setting the alarm time, the ALARM A (or B) indicator flashes in the display. The following example is when setting the ALARM A. When the alarm time setting is complete, the display returns to the clock after a few seconds and the ALARM A (or B) indicator changes from flashing to fully lit.  While ALARM A (or B) is set to , RADIO or MELODY, the alarm time setting can be changed by ALARM TIME SET A (or B) + or -. One press of ALARM TIME SET A (or B) + or - displays the alarm time for about 4 seconds. By pressing ALARM TIME SET A (or B) + or - while the alarm time appears in the display, the alarm time will be changed.  For the buzzer alarm, the beeping of the alarm becomes more rapid after every few seconds in three progressive stages.  The ALARM A (or B) indicator flashes in the display while: - The alarm time appears in the display. - The alarm sounds. - The snooze function is turned on.  The alarm time setting cannot be changed if ALARM A (or B) is set to OFF. If you press ALARM TIME SET A (or B) + or -, "OFF" appears in the display for about 0.5 seconds.  If a second alarm sounds during a first (or the snooze function is active), the second alarm takes priority.  CLOCK, DST, and TIME ZONE are unavailable while the alarm sounds or when the snooze function is turned on.  The alarm function works as usual at the first and last day of daylight saving time (summer time). As a result, if the automatic DST/ summer time adjustment is set and the alarm is set at a time skipped when the daylight saving time begins, the alarm is skipped; if the alarm is set at a time overlapping when daylight saving time ends, the alarm will sound twice.  If the same alarm time is set for both ALARM A and B, the ALARM A takes priority. To doze for a few more minutes Press SNOOZE/DATE/SLEEP OFF. The alarm sound stops but will automatically come on again after about 10 minutes. Each time you press SNOOZE/DATE/SLEEP OFF, the snooze time changes as follows: The maximum snooze time is 60 minutes. The display shows the snooze time for about 4 seconds and returns to show the current time. When you press SNOOZE/DATE/SLEEP OFF after the current time appears, the snooze time starts from 10 minutes again. To stop the Alarm Press RADIO OFF/ALARM RESET to turn off the alarm. The alarm will come on again at the same time the next day. If RADIO OFF/ALARM RESET is not pressed, the alarm sounds continuously for about 60 minutes, and then it will stop automatically. To deactivate the Alarm Set ALARM A (or B) to OFF. The ALARM A (or B) indicator disappears from the display. Note on alarm in the event of a power interruption In the event of a power interruption, the alarm functions work until the battery is empty. However, the following functions differ:  Nothing will appear on the display.  When the alarm sound is set to radio, it will change to buzzer automatically.  If the power returns while the alarm sounds, the alarm sounds continuously for about 60 minutes (or until turned off). Setting the sleep timer You can fall asleep to the radio using the built-in sleep timer that turns off the radio automatically after a preset duration. Press SLEEP. The radio turns on. You can set the sleep timer to 90, 60, 30, or 15 minutes. Each press changes the display as follows: 90 60 30 15 OFF Two short beeps sound when the display returns to "90". The radio will play for the duration you set, then shut off. To turn off the radio before the preset time Press RADIO OFF/ALARM RESET or SNOOZE/ DATE/SLEEP OFF. To use both sleep timer and alarm You can fall asleep to the radio and also be awakened by the buzzer, radio or melody alarm at the preset time. 1 Set the alarm. (See "Setting the alarm".) 2 Set the sleep timer. (See "Setting the sleep timer".) Precautions  Play the unit on the power source specified in "Specifications".  To disconnect the AC power cord (mains lead), pull it out by the plug, not the cord.  The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off.  The nameplate and important information concerning safety are located on the bottom exterior.  Do not leave the unit in a location near a heat source such as a radiator or airduct, or in a place subject to direct sunlight, excessive dust, mechanical vibration, or shock.  Allow adequate air circulation to prevent internal heat build-up. Do not place the unit on a surface (a rug, a blanket, etc.) or near materials (a curtain) which might block the ventilation holes.  Should any solid object or liquid fall into the unit, unplug the unit and have it checked by qualified personnel before operating it any further.  To clean the casing, use a soft cloth dampened with a mild detergent solution. NOTES ON LITHIUM BATTERY  Wipe the battery with a dry cloth to assure a good contact.  Be sure to observe the correct polarity when installing the battery.  Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. If you have any questions or problems concerning your unit, please consult your nearest Sony dealer. Troubleshooting Should any problem occur with the unit, make the following simple checks to determine whether or not servicing is required. If the problem persists, consult your nearest Sony dealer. The clock flashes "AM 12:00".  A power interruption occurred and the backup battery is low. Replace the battery. Remove the old battery and install a new one. The buzzer, radio or melody alarm does not sound at the preset alarm time.  Check that the buzzer, radio or melody alarm is activated (the ALARM A (or B) indicator lights up). The radio alarm is activated but does not sound at the preset alarm time.  Check that the volume is not set to minimum. When daylight saving time begins, the clock does not employ the daylight saving time automatically.  Make sure the clock is set correctly.  Press and hold DST for at least 3 seconds to activate the automatic DST/summer time adjustment. Specifications Time display 12-hour System Frequency range Band FM AM Frequency 87.5 - 108 MHz 530 - 1 710 kHz Speaker Approx. 6.6 cm (2 5/8 inches) dia., 8 Ω Power output 180 mW (at 10% harmonic distortion) Power requirements 120 V AC, 60 Hz For power backup: 3 V DC, one CR2032 battery Dimensions Approx. 178.9 × 121.8 × 88.5 mm (w/h/d) (7 1/8 × 4 7/8 × 3 1/2 inches) incl. projecting parts and controls Mass Approx. 638 g (1 lb 6.5 oz) incl. CR2032 battery Design and specifications are subject to change without notice.