Sony ILCE-5000L Help Guide - Page 189

Help Guide How to Use Interchangeable Lens Digital Camera ILCE-5000 Capturing a basic white color in [Custom Setup] mode In a scene where the ambient light consists of multiple types of light sources, it is recommended to use the custom white balance in order to accurately reproduce the whiteness. 1. MENU → (Camera Settings) → [White Balance] → [Custom Setup]. 2. Hold the product so that the white area fully covers the AF area located in the center, and then press center of the control wheel. The calibrated values (Color Temperature and Color Filter) are displayed and registered. on the Note The message [Custom WB Error] indicates that the value is higher than the expected range, when the flash is used on a subject with too bright colors in the frame. If you register this value, the indicator turns yellow on the recording information display. You can shoot at this point, but it is recommended that you set the white balance again to get a more accurate white balance value. Notes on use 4 - 487 - 944 - 11(1) Copyright 2014 Sony Corporation 189