Sony KD-65X75CH Reference Guide - Page 7

Installing the TV to the Wall This TV's instruction manual only provides the steps to prepare the TV for Wall-Mount installation before it is installed on the wall. Your TV can be mounted to a wall using a suitable Wall-Mount Bracket (not supplied). If the Table-Top Stand is attached to the TV, the TV may require detaching the Table-Top Stand; see "Detaching the Table-Top Stand from the TV". Prepare the TV for the Wall-Mount Bracket before making cable connections. For product protection and safety reasons, Sony strongly recommends that installation of your TV on the wall be performed by qualified professionals. Do not attempt to install it yourself. • Follow the instruction guide provided with the Wall-Mount Bracket for your model. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. • The screws for Wall-Mount Bracket are not supplied. • The length of the screw for Wall-Mount Bracket differs depending on the Wall-Mount Bracket thickness. Please refer to below illustration. 8 mm - 12 mm Screw (M6) Wall-Mount Bracket TV's rear cover • Refer to the following table for wall-mount hole pattern. Model Name KD-75X75CH KD-65X75CH KD-55X75CH Wall-mount hole pattern × 300 × 300 mm 200 × 200 mm • Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to attach the Table-Top Stand. US Keep the screws away from small children. Note • Read the supplied Safety Booklet for additional safety information. KD-75X75CH / 65X75CH Remove the screws from the rear of the TV. Attach the Wall-Mount Bracket (not supplied) using the screws (not supplied). KD-75X75CH / 65X75CH Wall-Mount Bracket Screw 7US