Sony KDE-42XS955 Instructions for Floating Stand (SU-PF3M/SU-PF3L) - Page 6

Assembling the Floating Stand WARNING If you allow the AC power cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. If you stumble over the AC power cord or the connecting cable, the stand may topple over and cause injury. Decide on the installation location and lay the stand down before installing the TV. Since the TV is heavy, it is recommended that you decide on the installation location and lay the Floating Stand down before installing the TV. Note Do not push or pull the Floating Stand while it is on the floor. The rubber footings on the base of the Floating Stand may come off. 1 Detach the cable covers. 1 Pull out the cable cover for the rear side of the TV from the Floating Stand. 2 Detach the cable cover for the pillars of the Floating Stand. Cable cover for rear side of the TV Cable cover for the pillars Slide your finger into the hole at the bottom of the Floating Stand and detach the cable cover. 2 Position the rear panel on the pillars and secure on each side with the supplied rear panel securing screws. 6 (US)