Sony KDF-55XS955 Operating Instructions (Large File - 14.9 MB) - Page 30

Cable and Antenna

Page 30 highlights

Setting Up the LCD Projection TV Cable and Antenna For best results, use this connection if you: ❑ Have a cable and an antenna. (This is convenient if you are using a separate rooftop antenna to receive additional channels that are not provided by your cable TV company.) ❑ Do not have a cable box or VCR. (If you have a cable box, see pages 31 and 32. If you have a VCR, see pages 35 and 36.) Antenna and CATV cable Cable Type Connect As Shown Cable TV (CATV) and Antenna Antenna cable CATV cable Notes on Using This Connection To Do This ... Switch the LCD projection TV's input between the cable and antenna Do This ... Press ANT to switch back and forth between the LCD projection TV's VHF/UHF and CABLE inputs. ✍ For optimum picture quality, a 75-ohm coaxial cable antenna connection is highly recommended. Radio waves and other interference can easily affect a 300-ohm twin lead cable, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away as possible from the LCD projection TV. ✍ Do not use an indoor antenna, which is especially susceptible to radio noise. 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129

Setting Up the LCD Projection TV
30
Cable and Antenna
For best results, use this connection if you:
Have a cable and an antenna.
(This is convenient if you are using a separate rooftop antenna to receive
additional channels that are not provided by your cable TV company.)
Do not have a cable box or VCR. (If you have a cable box, see pages 31
and 32. If you have a VCR, see pages 35 and 36.)
Notes on Using This Connection
Antenna and CATV cable
Cable Type
Connect As Shown
Cable TV
(CATV) and
Antenna
To Do This ...
Do This ...
Switch
the LCD projection
TV’s input between the cable
and antenna
Press
ANT
to switch back and forth between the
LCD projection TV’s VHF/UHF and CABLE
inputs.
For optimum picture quality, a 75-ohm coaxial cable antenna connection
is highly recommended. Radio waves and other interference can easily
affect a 300-ohm twin lead cable, resulting in signal deterioration. If you
use a 300-ohm twin lead cable, keep it as far away as possible from the
LCD projection TV.
Do not use an indoor antenna, which is especially susceptible to radio
noise.
Antenna cable
CATV cable