Sony KDL-19M4000/D Operating Instructions - Page 15
Connect to your DVD player's or digital set-top box's component video YP, left side panel of the TV. - hdmi
View all Sony KDL-19M4000/D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting Started Item 5 HDMI IN HDMI/ AUDIO IN Getting Started Description HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition video, plus digital audio. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN (with HDMI-to-DVI cable or adapter) jack, and connect the audio jack to the AUDIO IN(L/R) jacks of HDMI IN. (DVI connector is for video signals only.) HDMI-to-DVI cable HDMI adapter Audio cable Do not connect a PC to the TV's HDMI input. Use the PC IN (RGB IN) input instead when connecting a PC. 6 SERVICE ONLY This USB port is for service only. 7 DIGITAL AUDIO OUT (OPTICAL) Connects to the optical audio input of a digital audio equipment that is PCM/Dolby Digital compatible. 8 VIDEO 1 IN VIDEO/ L(MONO)AUDIO-R Connect to the composite video and audio output jacks on your A/V equipment such as a VCR or other video equipment. A second composite video and audio (VIDEO 2) is located on the left side panel of the TV. 9 COMPONENT IN (1080i/720p/ 480p/480i)/ L-AUDIO-R Connect to your DVD player's or digital set-top box's component video (YPBPR) and audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (1) or the composite video (2/8) connections. 0 AUDIO OUT L-AUDIO-R Connect to the left and right audio input jacks of your audio or video equipment. You can use these outputs to listen to your TV's audio through your stereo system. qa AC IN Connects the supplied AC power cord. qs CABLE/ ANTENNA RF input that connects to your Cable or VHF/UHF antenna. * Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. VIDEO 2 IN is equipped with S VIDEO. S VIDEO is selected primarily when both composite video jack and S VIDEO jack are connected. Component video (YPBPR) connection is necessary to view 480i, 480p, 720p, and 1080i formats. Note that this TV displays all format types of picture in a resolution of 1,440 dots × 900 lines. HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats. Note that this TV displays all format types of picture in a resolution of 1,440 dots × 900 lines. 15