Sony KDL-26M3000 Instructions (SU-WL100 Wall-mount Bracket) - Page 4

CAUTION If the following precautions are not observed, injury or property damage may occur. Do not install the Wall-Mount Bracket on wall surfaces where the corners or the sides of the TV protrude away from the wall surface. Do not install the Wall-Mount Bracket on wall surfaces such as a pillar, where the corners or the sides of the TV protrude away from the wall surface. If a person or object happens to hit the protruded corner or side of the TV, it may cause injury or property damage. Do not handle the product with excessive force during cleaning or maintenance. Do not apply excessive force on the topside of the TV. If you do so, the TV may fall and cause injury or property damage. Do not install the TV over or under an air-conditioner. If the TV is exposed to water leaks or air current from an airconditioner for a long time, it may cause a fire, an electric shock or a malfunction of the TV. Precautions Installing the Wall-Mount Bracket To Sony Dealers WARNING To Customers Sufficient expertise is required for installing this product. Be sure to subcontract the installation to Sony dealers or licensed contractors and pay special attention to safety during the installation. To Sony Dealers The following instructions are for Sony Dealers only. Be sure to read safety precautions described above and pay special attention to safety during the installation, maintenance and checking of this product. Be sure to install the Wall-Mount Bracket securely to the wall following the instructions in this instruction manual. If any of the screws are loose or fall out, the Wall-Mount Bracket may fall and cause injury or property damage. Be sure to use the appropriate screws for the material of the wall and install the unit securely using four or more 6 mm (1/4 inches) diameter (or equivalent) screws. • If you use the TV installed on the Wall-Mount Bracket for a long time, the wall behind or above the TV may become discolored or the wallpaper may come unstuck, depending on the material of the wall. • If the Wall-Mount Bracket is removed after installing it on the wall, the screw holes are left. • If you have routed 300-ohm feeder cables behind the wall, we recommend that you change them to 75-ohm coaxial cables. If it is necessary to continue to use 300-ohm feeder cables, be sure there is sufficient space available between the TV and the feeder cables behind the wall before installing. Consult your licensed contractor regarding an appropriate location (free from radio noise, etc.) before installing. Be sure to use the supplied screws and attachment parts properly following the instructions given in this instruction manual. If you use substitute items, the TV may fall and cause bodily injury to someone or damage to the TV. Be sure to assemble the bracket properly following the instructed procedure explained in this instruction manual. If any of the screws are loose or fall out, the TV may fall and cause bodily injury to someone or damage to the TV. 4 (GB)