Sony KDL-26S3000W Instructions (SU-WL100 Wall-mount Bracket) - Page 9
Adjust the angle of the Mounting, Hook., Secure the Mounting Hook to
View all Sony KDL-26S3000W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
3 Adjust the angle of the Mounting Hook. When installing the TV parallel to the wall (0 degrees), adjustment of the Mounting Hook angle (procedures 1 and 2 below) is not necessary. 1 Remove the angle adjusting screw from the arm of the Mounting Hook. Choose the holes corresponding to the desired angle (5, 10, 15 or 20 degrees). 2 Firmly secure the arm using the screw removed in the previous procedure 1. Mounting Hook 4 Secure the Mounting Hook to the right side of rear of the TV. 1 Secure the Mounting Hook to the rear of the TV temporarily, using the supplied two screws (+PSW4 × 12). 2 Be sure that both screws are tightened securely with equal torque strength to the rear of the TV. If you adjusted the left angle of the Mounting Hook, also perform the same adjustment as in 3 of Step 5 "Adjust the angle of the Mounting Hook" for the right. Screw (+PSW4 × 12) Mounting Hook Arm 1 2 CAUTION Be careful not to pinch your fingers when adjusting the angle of the Mounting Hook. Notes • Be sure to adjust the right and left arms to the same angle. • Make sure that the two arm bases are screwed in securely. 9 (GB)