Sony KDL-32L504 Operating Instructions - Page 44

Specifications Model KDL-32L504 System Television system NTSC: American TV standard ATSC (8VSB terrestrial): ATSC compliant 8VSB QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality) Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69 Analog Cable: 1 - 135 / Digital Cable: 1 - 135 Panel system LCD (Liquid Crystal Display) Panel Speaker output 10 W + 10 W Input/Output jacks CABLE/ANTENNA 75-ohm external terminal for RF inputs VIDEO IN 1/2 S VIDEO (4-pin mini DIN) (VIDEO 2 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / C: 0.286 Vp-p (Burst signal), 75 ohms VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms COMPONENT IN 1/2 YPBPR (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / PB: 0.7 Vp-p, 75 ohms PR: 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms HDMI IN 1/2/3 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20 and 24bits, Dolby Digital AUDIO (HDMI IN 1 only): 500 mVrms (Typical) / Impedance: 47 kilohms PC Input (see page 37) AUDIO OUT 500 mVrms (typical) DIGITAL AUDIO OUT (OPTICAL) PCM/Dolby Digital optical signal PC IN D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive See the PC Input Signal Reference Chart for PC and HDMI IN 1/2/3 on page 37. PC AUDIO INPUT Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms Power and others Power requirement 120-240 V AC, 50/60 Hz Power consumption in use 135 W in standby less than 0.5 W Screen size (inches measured diagonally) 31.5 (32 class) Display resolution 1,366 dots (horizontal) × 768 lines (vertical) Speaker/Full range (2) (mm) (inches) 34 × 175 1 3/8 × 7 Dimensions with stand (mm) 807 × 557 × 222 (inches) 31 7/8 × 22 × 8 3/4 without stand (mm) 807 × 508 × 94 (inches) 31 7/8 × 20 × 3 3/4 wall-mount hole pattern (mm) 200 × 200 wall-mount screw size (mm) M6 (length: refer to diagram on page 38) Mass with stand (kg) 12.7 (lb.) 28.0 without stand (kg) 11.4 (lb.) 25.3 Supplied accessories Remote control RM-YD028 (1) / Size AA batteries (2) / Operating Instructions (1) / Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) / Attaching the Table-Top Stand (1) / Screws (4) Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket: see page 2 • Optional accessories availability depends on its stock. • Design and specifications are subject to change without notice. 44