Sony KDL-32M4000 Operating Instructions - Page 16

PC Use the TV as a monitor for your PC. Shown below with the HD15 to HD15 connection. This TV can also be connected to a PC with DVI or HDMI output. (Refer to the supplied Quick Setup Guide.) HD15HD15 cable (analog RGB) Rear of TV SERVICE ONLY Y 1 2 IN S VIDEO VIDEO L (MONO) AUDIO R 1 VIDEO IN PB PR L AUDIO R R RGB AUDIO L DIGITAL AUDIO OUT (COAXIAL) R L 1 2 COMPONENT IN (1080i/720p/480p/480i) AUDIO PC IN AUDIO OUT (FIX) Audio cable (stereo mini plugs) ~ • Connect the PC IN jack to the PC using the HD15-HD15 cable with ferrite core (analog RGB) and audio cable (page 13). PC Input Signal Reference Chart After connecting the PC to the TV, set the output signal from the PC according to the chart below. Signals VGA SVGA XGA WXGA ~ Resolution Horizontal × Vertical (Pixel) (Line) 640 × 480 640 × 480 800 × 600 800 × 600 1,024 × 768 1,024 × 768 1,024 × 768 1,280 × 768 1,360 × 768 Horizontal frequency (kHz) 31.5 37.5 37.9 46.9 48.4 56.5 60.0 47.8 47.7 Vertical frequency (Hz) 60 75 60 75 60 70 75 60 60 Standard VGA VESA VESA Guidelines VESA VESA Guidelines VESA VESA VESA VESA • This TV's PC input does not support Sync on Green or Composite Sync. • This TV's PC VGA input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be detected automatically. (PC reboot may be necessary.) 16