Sony KDL-32XBR4 Operating Instructions - Page 15

Getting Started Item 1 HDMI IN 1 HDMI 2 HDMI IN 3 HDMI/ R-AUDIO-L Description HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray Disc player, A/V receiver as well as PC. HDMI supports enhanced, or high-definition video, plus digital audio. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 3 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 3. DVI-to-HDMI cable Audio cable 3 PC IN (RGB/AUDIO) 4 VIDEO IN 1 S VIDEO DVI-to-HDMI adapter ~ • HDMI connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats. Note that this TV displays all video input signals in a resolution of 1,366 dots × 768 lines. • Be sure to use only an HDMI cable that bears the HDMI logo. Connects to a personal computer's video output connector using HD15-HD15 cable (analog RGB). Can also be connected to other analog RGB equipment. See "PC Input Signal Reference Chart" on page 18 for the signals that can be displayed. ~ • For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15-HD15 cable. • If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings on page 33. Connects to the S VIDEO output jack of your VCR or other video equipment that has S VIDEO. The S VIDEO provides better picture quality than composite video (5). (See Auto S Video on page 39.) 5 VIDEO IN 1/3 VIDEO/ L(MONO)AUDIO-R 6 COMPONENT IN 1/2 (1080p/1080i/ 720p/480p/480i)/ L-AUDIO-R 7 AUDIO OUT (VAR/FIX) 8 DIGITAL OUT (OPTICAL) 9 AC IN 0 DMex/ SERVICE qa VHF/UHF/CABLE Connects to the composite video and audio output jacks on your A/V equipment such as a VCR or other video equipment. A third composite video and audio (VIDEO 2 IN) is located on the left side of the TV. Connects to your TV's component video (YPBPR) and audio (L/R) jacks. Component video provides better picture quality than the S VIDEO (4) or the composite video (5) connections. ~ • Component video (YPBPR) connection is necessary to view 480i, 480p, 720p, 1080i and 1080p formats. Note that this TV displays all video input signals in a resolution of 1,366 dots × 768 lines. Connects to the left and right audio input jacks of your analog audio equipment. You can use these outputs to listen to your TV's audio through your stereo system. Connects to the optical audio input of your digital audio equipment that is PCM/Dolby Digital compatible. Connects the supplied AC power cord. This USB port is for service only unless you are connecting the optional BRAVIA external module (DMex). RF input that connects to your Cable or VHF/UHF antenna. 15