Sony KDL-40EX520 Setup Guide (Operating Instructions) - Page 8
: Adjusting the viewing angle of the TV, Detaching the Table-Top, Stand from the TV
UPC - 027242817166
View all Sony KDL-40EX520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
B KDL-40/32EX521 (Mexico models) Guide pins ~ • Align the TV from the top, slide it in until the guide pins cannot be seen. 2 Use the supplied screws to attach the TV unit to the Table-Top Stand. B KDL-46/40/32EX52x (except KDL-40/32EX521 (Mexico models)) Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 2. ~ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the display face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the LCD display, make sure to place a soft cloth on the work surface. • When installing the TV on a wall, remove the screws from the rear of the TV. The screws and number of screws depends on the TV model. (They are fastened in the screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from children. • When attaching the Table-Top Stand again, be sure to fasten the screws (previously removed) to the original holes on the rear of the TV. B KDL-40/32EX521 (Mexico models) ~ • If you use an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}. 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. Angle adjustment (Swivel) ~ • When adjusting the angle, hold the stand with one hand to avoid having the stand slip or TV tip over. B KDL-46/40/32EX52x (except KDL-40/32EX521 (Mexico models)) 20° 20° 20° 20° 8