Sony KDL-40NX700 Setup Guide (Operating Instructions) - Page 14

Running initial setup 1 Complete your cable connections before proceeding with the Initial Setup. Connect the TV to your nearest power outlet. 2 Check the ENERGY SAVING SWITCH setting is on (z). 3 Press 1 on the TV. When you switch the TV on for the first time, the Language menu appears on the screen. Detaching the Table-Top Stand from the TV Remove only the screws marked with on the TV. ~ • The NX700/NX800 series models must remove the stand rear cover prior to detaching the TableTop Stand. • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When installing the TV on a wall, remove the four screws from the rear of the TV. (They are fastened in the screw holes for wall mounting.) Be sure to store the removed screws in a safe place, keeping them away from children (for KDL-60/52NX801 and KDL-60/52/46NX800 models). • When attaching the Table-Top Stand again, be sure to fasten the four screws (previously removed) to the original holes on the rear of the TV (for KDL-60/52NX801 and KDL-60/52/ 46NX800 models). ~ • The TV image shown here may differ from your TV but the operation of your TV remains the same as indicated. 4 Follow the instructions on the screen. ~ • The ENERGY SAVING SWITCH must be on (z) to set the clock and obtain program information for the TV Guide. • Home mode sets the TV to display the settings optimized for home viewing (this setting is ENERGY STAR compliant). 5 Select Continue to scan for available channels and enable the TV Guide On Screen® feature. If you receive channels from a cable box or satellite receiver and do not wish to use the TV's built-in tuner, select Skip. Selecting Skip will disable the TV Guide On Screen feature, which is only available when the TV's tuner is used. ~ • If you skip the channel scan while in the setup menus, TV Guide will be disabled. 14