Sony KDL-40SL130 Quick Setup Guide - Page 1

3-196-473-12(1) KDL-26S3000 KDL-32S3000 KDL-40S3000 KDL-46S3000 KDL-32SL130 KDL-40SL130 Quick Setup Guide For further information, see the Operating Instruction Manual supplied with the TV. Please retain this guide for your future reference. For Your Convenience Please contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and Operating Instruction Manual. Contact Sony Customer Support at: http://www.sony.com/tvsupport Or to speak with a support representative: United States Canada 1-800-222-SONY (7669) 1-877-899-SONY (7669) Please Do Not Return the Product to the Store ©2007 Sony Corporation Printed in U.S.A. 1 BRAVIA Your New ™ Flat-panel LCD HDTV 2 Connecting Your TV Congratulations! Your new BRAVIA™ TV opens the door to the "Stunning HD Experience". This guide will explain how to get the most from your new High Definition TV. Learn more. Visit the Sony HDTV Learning Center www.sony.com/HDTV Please take these steps before you power up your BRAVIA™: ■ Register online at: www.sony.com/registration (from U.S.A.) www.SonyStyle.ca/registration (from Canada) ■ Make sure you've removed all accessory contents from packaging. ■ Install 2 AA batteries (supplied separately) in your remote control. ■ Determine whether you will hang your TV on a wall or place it on a floor stand. Sony wall mounting brackets are designed to provide the best fit. ■ Give your TV 2 3/8 inches (6 cm) of space behind it to properly ventilate. The Four Steps to a Stunning HD Experience: Set, Sound, Source, and Setup Along with your BRAVIA™ TV set, a complete HD system requires an HD sound system, a source of HD content, and proper setup connection with components such as your HD cable or satellite box. You must get HD programming to experience the stunning detail of HDTV. The quality of the image you see on your BRAVIA™ can only be as high as the quality of the signal it is displaying. This chart shows the different signal types and how to access them. Best Signal Performance Comments High Definition Best Picture Quality 16:9 Content Aspect Ratio Digital Content Good Picture Quality Aspect Ratio based on Program Analog Content Original TV format 4:3 Aspect Ratio Sources HD Over-The-Air Antenna HD Cable Subscription/ Programming HD Satellite Subscription Over-The-Air Antenna Digital Cable Subscription Digital Satellite Subscription Over-The-Air Antenna Cable Subscription Contact your cable or satellite provider to upgrade your service to HD. Receive over-the-air HD broadcasts with an HD-quality antenna (www.antennaweb.org) and discover the wealth of entertainment now available on super-high-resolution Blu-ray Disc™. Your BRAVIA™ TV must be properly connected to components such as sound system and cable or satellite box. See reverse side of this poster for sample connection diagrams. ■ Turn off and unplug all components before making connections. ■ Do not turn on the TV until connection setup is completed. Audio/Video Performance Input Connector HDMI 1 HDMI 2 Component 1 Component 2 Video 1 Video 2 Video 1 Video 2 Video 3 Video Connection HDMI connection* Component connection Audio Connection High or Standard Definition Quality HDMI cable carries both video and audio signals. Separate audio cable is not needed. (*When HDMI is connected to DVI with an adapter, a separate audio L/R is necessary.) Audio L/R 1080p, 1080i, 720p, 480p, 480i, PC (Compatible with HD or SD content) 1080p, 1080i, 720p, 480p, 480i (Compatible with HD or SD content) S VIDEO connection (Use this connector in place of composite video connector) Audio L/R Composite video connection (Shown with video and audio connectors) Audio L/R 480i (SD content) What is HDMI™? HDMI (High-Definition Multimedia Interface) cables are the standard for connecting HDTV. They are built to properly handle high bandwidth, uncompressed video and multi-channel audio-all in one cable. Connecting a PC to Your BRAVIA™ ■ May require DVI-to-HDMI adapter and separate audio connector. ■ Connect PC's audio output when using a Digital Video Interface (DVI) or HD15 connection. ■ Press PC's FUNCTION Key + Select Output to transmit to TV. ■ When using an HD15 connection, adjust TV's Pitch and Phase to correct sharpness. ■ Refer to your BRAVIA™ Operating Instruction Manual for more information. To learn more about HDTV, visit www.sony.com/HDTV 3 Running Initial Setup 4 Watching Your TV Initial Setup instructions are displayed on the screen when your BRAVIA™ is powered on for the first time. 1 Select the language for the OSD (on screen display). Initial Setup Step 1 of 5 Please select a language. Language settings will apply to on screen display as well as default audio for digital channels. Highlight a choice and press to continue. English Español Français 2 Connect either Antenna or Cable to your TV. Initial Setup Step 2 of 5 Auto Program allows the TV to tune channels directly from your cable or antenna feed. If you are using only a cable or satellite set top box, it is not necessary to run Auto Program. In this case, choose "Skip". Auto Program may take 30+ minutes to complete. Auto Program Skip VHF/UHF/CABLE Select Auto Program to advance to the Auto Programming. If you are not using the VHF/UHF/CABLE connection to TV, you can cancel the Auto Program by selecting the Skip option. 3 Your TV will detect the type of signal connected and will start scanning for the channels. Initial Setup Step 3 of 5 Please allow 30+ minutes to complete. Pressing or will cancel auto program. Channels Found Analog: 58 Digital: 0 Searching... 4 Follow on-screen instructions to complete setup and begin viewing your TV. Initial Setup Step 5 of 5 Select "OK" to use your TV OK To Access Initial Setup by Remote Control If you did not follow the Initial Setup screen the first time, press the HOME button on your remote control to display the TV Home Menu/XMB™ (XrossMediaBar) and select the Initial Setup icon under the Settings category. 1 XMB™ (XrossMediaBar) appears. HDMI Settings General 1.2.3 TV 2 Select Initial Setup icon. Settings Start Initial Setup now? Some channels may be overwritten. 1.2.3 Yes No To Do List When the Initial Setup is completed, consider carrying out these items: Set Clock Set Closed Captions (CC) Set Parental Lock Show/Hide Channels Label Inputs (skip inputs) Speakers On/Off For details, refer to your BRAVIA™ Operating Instruction Manual. Select Your Content Source Whether you are watching cable, satellite or broadcast TV; playing a VCR, DVD or Blu-ray Disc™; or connecting to your PC, you need to choose the correct Input using your remote control: ■ Press the HOME button on your remote control to display on-screen the TV mode or External Inputs selection menu; OR ■ Press the INPUT button repeatedly until your selection is highlighted on-screen. Adjust Screen Shape and Aspect Ratio High Definition and Standard Definition signals are transmitted with different aspect ratios (the width-to-height shape of the image). Most HD signals use a widescreen aspect ratio of 16:9. Most SD signals use a boxy 4:3 aspect ratio. The 16:9 aspect ratio looks perfect on your BRAVIA™, but a 4:3 image must be adjusted to look right. You can: ■ Adjust your TV so boxy 4:3 images are automatically re-configured (zoomed or stretched) to fit the wide TV screen; OR ■ Watch SD content in its original, boxy format with wide black bars surrounding the image to fill in unused space (for example, you may prefer to watch an old classic movie in its original 4:3 format, not reconfigured for a wide screen). ■ Press the WIDE button on your remote control to display the Wide Mode setting of your preference. ■ Visit www.learningcenter.sony.us/HomeAudioandVideo/Televisions/Research1/TheBasicsofDTV for more information. Customize Sound and Picture Quality You can choose optimum sound and picture settings to match the content you are displaying on your TV: ■ Press the HOME button on your remote control and select Picture or Sound. Choose the appropriate setting for your content. ■ Use the remote control OPTIONS button to quickly adjust sound and picture quality. ■ Refer to your BRAVIA™ Operating Instruction Manual for more information. To learn more about HDTV, visit www.sony.com/HDTV XMB™ (XrossMediaBar) with focus on Settings. Select Settings to customize your TV. Product Support Clock/Timers Sound Screen Video Options TV XMB™ (XrossMediaBar) with focus on TV mode. Select the channels from here or use the 0-9 number buttons on your remote control. 7 8 Cable 8.1 KFMB-DT 9 10 10.1 TV 11 XMB™ (XrossMediaBar) with focus on External Inputs. Select connected device from here or use the INPUT button on your remote control. Video2 Video3 Component2 HDMI1 HDMI2 TV