Sony KDL 40Z4100 B Operating Instructions - Page 6
Getting Started, 1. Installing the TV, Carrying the TV, Preparation for Table-Top Stand - b lcd tv
UPC - 027242736641
View all Sony KDL 40Z4100 B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Getting Started 1. Installing the TV This TV can be mounted on a wall using a WallMount Bracket or placed on a TV stand (each sold separately). This section will explain: • How to carry the TV • Preparation for a Table-Top stand • Preparation for a Wall-Mount Bracket • Installation against a wall or enclosed area • Bundling the connecting cables • Securing the TV Carrying the TV Be sure to follow these guidelines to protect your property and avoid causing serious injury. • Before carrying the TV, disconnect all cables. • Carrying the large size TV requires two or more people. • When carrying the TV, place your hand as illustrated and hold it securely. Do not subject the TV to shocks, vibration, or excessive force. Preparation for Table-Top Stand Follow the assembling steps required to place on a TV stand. 1 Remove the Table-Top Stand and screws from the carton. The screws can be found in the accessory bag. Table-Top Stand Stand Rear Cover TV Unit 2 Place the Table-Top Stand on a level and stable surface. 3 Gently slide the TV unit onto the neck of the Table-Top Stand and align the screw holes. • Lift the TV by placing your palm directly underneath the panel but do not put stress on the LCD panel. • Do not lift the TV from the bottom center. 6 ~ • Do not put stress on the LCD panel or the frame around the screen. • Be careful to not pinch your hands or the AC power cord when you install the TV unit to the Table-Top Stand. 4 Use the supplied screws to attach the TV unit to the Table-Top Stand (refer to the "Attaching the Table-Top Stand" flyer). If an electric screwdriver is used, set the torque to tighten at approximately 1.5 N·m, 15 Kgf·cm.