Sony KDL-40Z4100 Operating Instructions - Page 46
Screen Position, Full Pixel - replacement screen
View all Sony KDL-40Z4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
4:3 Default Select the default screen mode to use for 4:3 sources Display Area Screen Position Vertical Size Wide Zoom Enlarges the 4:3 picture to fill the 16:9 screen, displaying as much of the original image as possible. Normal Displays the 4:3 picture in its original aspect ratio. Full Select to enlarge the 4:3 picture horizontally only, to fill the screen. Zoom Select to enlarge the picture horizontally and vertically to fill the screen while maintaining the aspect ratio. Off Select to continue using the current Wide Mode setting when the channel or input is changed. ~ • 4:3 Default is not available if Auto Wide is set to Off. • If 4:3 Default is set to anything but Off, the Wide Mode setting applies only to the current channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting for 4:3 sources. To retain the current Wide Mode setting as channels and inputs are changed, set 4:3 Default to Off. Full Pixel Displays the picture for 1080i, 1080p or 1080/24p sources in its original size. Normal Displays the picture in its original size. -1/-2 Enlarges the picture to hide the edges of the picture. ~ • For 720p, 1080i, 1080p and 1080/24p, feature is only available when Wide Mode is set to Full. Adjust the Vertical positioning by pressing V/v. Press B/b to adjust the Horizontal positioning. ~ • Screen Position feature is useful if the TV is connected to game equipment. • Vertical position is available only when Wide Mode is set to Zoom. • For high-definition signals, Vertical and Horizontal positions are not available. Adjusts the vertical size of a standard-definition picture. ~ • Vertical Size is available only when Wide Mode is set to Wide Zoom or Zoom for standard-definition channels. Screen settings for PC timings and HDMI-PC (PC input) differ from all other input modes and are shown below. Auto Adjust Select Yes to start the auto adjust for the PC input. Reset Resets the settings to the default values. Phase Adjust after Pitch to fine tune overall sharpness. Pitch Adjust uneven sharpness on screen. ~ • For the PC Input Signal Reference Chart, see page 14. H Center Allows you to move the position of the picture horizontally (left and right). V Center Allows you to move the position of the picture vertically (up and down). Wide Mode Normal Select to display the picture in its original resolution and aspect ratio. Full 1 Select to enlarge the picture to fill the screen, while maintaining its original aspect ratio. Full 2 Select to enlarge the picture to fill the screen. ~ • Wide Mode can also be accessed by pressing WIDE on the remote control. • See WIDE button description on page 22 for accessing Wide Mode. ~ • Phase and Pitch options are not available with PC signal connected to HDMI input. 46