Sony KDL-42XBR950 Instructions for stand (primary manual) - Page 7

Install the Display Unit WARNING Be sure to complete the installation before connecting the AC power cord to the wall outlet. If you allow the AC power cord to be pinched under or between pieces of equipment, this may result in a short circuit or an electric shock. If you stumble over the AC power cord or the Display Unit, the stand may topple over and cause injury. 1 Install the Display Unit on the Tabletop Stand. 1 Connect the AC power cord and the Display Interface Cable to the Display Unit. z Tip Rear side of the Display Unit See the instruction manual of the Sony Flat Panel Color Television or LCD Color Television for more details on connecting the AC power cord and the Display Interface Cable. AC power cord Display Interface Cable Notes • If the weight of the Display Unit is placed on the speakers, deformation or a loose connection of the speakers may result. To avoid this, observe the following. (KDE55XBR950, KDE61XBR950, KDL42XBR950 only) - Do not hold the speakers when carrying the Display Unit. - When connecting cables to the Display Unit, place packing material, etc. on the floor and lay the Display Unit face down on it so that the speakers on either side of the Display Unit are clear of the packing material, etc. • Be sure to place the Display Unit stably. • Use soft cloth to protect the screen of the Display Unit from damage or dirt. Soft rag KDE42XBR950/KDE50XBR950 Speaker (left) Rear side of the Display Unit Packing material, etc. Soft rag Speaker (right) (The model of the Display Unit in the illustration is KDE61XBR950.) KDE55XBR950/KDE61XBR950 Speaker (left) Packing material, etc. Rear side of the Display Unit AC power cord Display Interface Cable Soft rag Speaker (right) KDL42XBR950 7 (US)