Sony KDL-46HX820 Setup Guide (Operating Instructions) - Page 9

Getting Started • If you are having problems with the remote control, reinsert or replace your batteries and make sure that they are correctly inserted. Before setting up your TV Some TV models are packaged with a detached Table-Top Stand so you can mount your TV to a wall right away. If you are not mounting the TV to a wall, you will need to attach the Table-Top Stand. You will need a Phillips screwdriver (not supplied) and maybe also a hexagon wrench (supplied with some models) and the supplied screws to complete the task. Look for the supplied Table-Top Stand instruction leaflet. Be sure to consider the following while setting up your TV: • Disconnect all cables when carrying the TV. • Carry the TV with the adequate number of people; larger size TVs require two or more people. • Correct hand placement while carrying the TV is very important for safety and to avoid damage. • Avoid moving the TV from a cold area to a warm area. Sudden room temperature changes may cause moisture condensation. This may cause the TV to show poor picture and/or poor color. Should this occur, allow moisture to evaporate completely before powering the TV on. • Ensure that there are no objects in front of the TV. • Do not expose the Intelligent Presence Sensor to direct sunlight or other strong light, as malfunction may occur. IR Sensor Intelligent Presence Sensor 3D Sync Transmitter • Ensure your TV has adequate ventilation, see page 18. • For best picture quality, do not expose the screen to direct illumination or sunlight. • Avoid installing the TV in a room with reflective wall and floor materials. 9