Sony KDL 46W4150 Operating Instructions - Page 11
Audio Out Var, Out Optical - model
UPC - 027242738850
View all Sony KDL 46W4150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Getting Started Item 1 VIDEO IN 1 S VIDEO Description Connects to the S VIDEO output jack of video equipment. If both composite video and S VIDEO are connected, S VIDEO signal has priority. VIDEO IN 2/3 VIDEO/L(MONO)AUDIO-R 2 COMPONENT IN 1/2 (1080p/1080i/ 720p/480p/480i)/ L-AUDIO-R 3 PC IN (RGB/AUDIO) 4 HDMI IN 1/2/3 Connects to the composite video and audio output jacks on your A/V equipment. ~ • If you have mono equipment, connect its audio output jack to the TV's L (MONO) audio input jack. Connects to your equipment's component video (YPBPR) and audio (L/R) jacks. Connects to a personal computer's video and audio output connector (see page 14). Can also be connected to other analog RGB equipment. See "PC Input Signal Reference Chart" on page 14 for the signals that can be displayed. ~ • For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15-HD15 cable. • If the picture is noisy, flickering or not clear, adjust Phase and Pitch of Screen settings on page 36. HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital audio/video interface between this TV and any HDMI-equipped A/V equipment. HDMI supports enhanced, or high-definition video, plus digital audio. HDMI IN 4 R-AUDIO-L If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to the HDMI IN 4 (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the AUDIO IN (L/R) jacks of HDMI IN 4. ~ 5 DMex/ SERVICE • Be sure to use only an HDMI cable that bears the HDMI logo. • When connecting a DVI-equipped PC to an HDMI jack, also connect an Audio cable between the PC and R-AUDIO-L jack. This USB port is for service only unless you are connecting the optional BRAVIA external module (DMex). 6 DIGITAL AUDIO Connects to the optical audio input of your digital audio equipment that is PCM/Dolby* OUT (OPTICAL) Digital compatible. 7 AUDIO OUT (VAR/ Connects to the left and right audio input jacks of your analog audio equipment. You can FIX) use these outputs to listen to your TV's audio through your stereo system. 8 CABLE/ ANTENNA RF input that connects to your cable or VHF/UHF antenna. 9 AC power cord or Connects to your power source. For models with attached cords: Plug the cord into the AC IN nearest wall outlet. For models with separate cords: Connect the supplied power cord to AC IN and the nearest wall outlet. * Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories. 11