Sony KDL-46WL140 Attachment Guide (For DMX-NV1 model bundled with KDLxxWL140 T - Page 2

3 Insert the Mounting Knobs into the threaded holes and lightly twist by hand. Do not fully tighten the Mounting Knobs. 4 Place the bottom Mounting Knob into the hole on the bracket, leaving the top Mounting Knob sitting above the top hole. Cables thread out on this side 5 Push down the receiver so both Mounting Knobs are locked into the grooves, then fully tighten the Mounting Knobs by hand. To Remove the Mounting Bracket Follow the steps in reverse order. Use a Phillips Screwdriver to remove the Plastic Fasteners. LED Lights 1 NETWORK INPUT RESET IN 2 VIDEO IN 2 VIDEO L (MONO) AUDIO R ~ Make sure that the cables are organized with the Cable Cover so that the cables hang out on the same side as the Mounting Knobs.