Sony KDL 46Z4100 B Operating Instructions - Page 9
Securing the TV, Prevent the TV from Toppling Over, Use a Sony TV Stand - back
UPC - 027242736627
View all Sony KDL 46Z4100 B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Securing the TV Sony strongly recommends taking measures to prevent the TV from toppling over. Unsecured TVs may topple and result in property damage, serious bodily injury or even death. Prevent the TV from Toppling Over s Secure the TV to a wall and/or stand. s Do not allow children to play or climb on furniture and TV sets. s Avoid placing or hanging items on the TV. s Never install the TV on: • slippery, unstable and/or uneven surfaces. • furniture that can easily be used as steps, such as a chest of drawers. s Install the TV where it cannot be pulled, pushed, or knocked over. s Route all AC power cords and connecting cables so that they are not accessible to curious children. Use a Sony TV Stand Use a Sony specified TV stand (see page 2) and follow the instruction manual provided with the Sony TV stand. If a Sony specified TV stand is not used, consider the following recommended measures. Recommended Measures to Secure the TV Secure the Stand for the TV Make sure the TV stand can adequately support the weight of the TV. Use two angle braces (not supplied) to secure the stand. For each angle brace use the appropriate hardware to: • attach one side of the angle brace to the wall stud. • attach the other side to the TV stand. Angle brace Stand • Rope or chain (strong enough to support the weight of the TV). Make sure that there is no excess slack in the rope or chain. An alternative way to secure the TV is with an optional Sony Support Belt Kit. Anchor bolt Screw Screw hole on the Table-Top Stand ~ Contact Sony Customer Support to obtain the optional Support Belt Kit by providing your TV model name. • For United States call: 1-800-488-7669 or visit: www.sony.com/accessories • For Canada call: 1-877-899-7669 Anchor the TV to the Wall Use the hardware listed below (not supplied): • Two M6 × 12-18 mm anchor bolts (screw into the top-most wall-mount holes located on the rear of the TV) • Rope or chain (attach to one M6 anchor bolt) • Wall-anchor (attach to the wall stud) strong enough to support the weight of the TV (pass the rope through the wall-anchor, then attach to the other M6 anchor bolt) Anchor bolts Wall-mount holes Rope or chain Wallanchor Secure the TV to the Stand Use the optional hardware listed below (not supplied): • M6 × 12-18 mm anchor bolt (screwed into the TV's Table-Top Stand) • A screw or similar (attach it to the TV stand) ~ • Securing the TV to the stand without securing it and the stand to the wall provides minimum protection against the TV toppling over. For further protection, follow all three measures recommended above. 9