Sony KDL-52EX700 Additional Informatino for Using Sony® Wall-Mount Bra - Page 3
Install the Base Bracket on the wall., Disconnect all the cables from the TV., Secure the Mounting - wall mount
UPC - 027242784888
View all Sony KDL-52EX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
CAUTION The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to your TV's operating instructions for its weight. 3 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL500. 4 Disconnect all the cables from the TV. 5 Secure the Mounting Hook to the rear of the TV. Determine the screw locations and secure the Mounting Hooks to the rear of the TV. Refer to the "Screw and Hook Locations Diagram/Table" shown below. KDL‑HX*, KDL‑32EX30*only Square hole Mounting Hook Screw (+PSW6 × 16) KDL-EX70* only Before installing, remove screws Square hole Mounting Hook Screw (+PSW6 × 16) Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) − −