Sony KDL-52WL140 Operating Instructions - Page 14
PC, Picture, Wide Mode, Custom, Display Area, Full Pixel - hdtv
View all Sony KDL-52WL140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
PC Use the TV as a monitor for your PC by connecting a HD15 to HD15 cable as shown below. This TV can also be connected to a PC with a DVI or HDMI output. (Refer to the separate Quick Setup Guide.) Rear of TV HD15-HD15 cable (analog RGB) VIDEO IN 1 3 S VIDEO VIDEO L (MONO) AUDIO R COMPONENT IN PC IN 1 2 Y RGB PB PR L AUDIO R AUDIO (1080p/1080i/720p/480p/480i) IN DIGITAL 1 AUDIO OUT (OPTICAL) 3 4 AUDIO OUT R AUDIO L L AUDIO R (VAR/FIX) Audio cable (stereo mini plugs) ~ • Connect the PC IN jack to the PC using an HD15HD15 cable with ferrite core (analog RGB) and audio cable (see page 11). • If the PC is connected to the TV and no signal has been input from the PC for more than 30 seconds, the TV enters the standby mode automatically (see page 42). PC Input Signal Reference Chart After connecting the PC to the TV, set the output signal from the PC according to the supported resolutions and timings indicated below. Supported resolutions Signal VGA Horizontal × (Pixel) 640 × 640 × 720 × SVGA 800 × 800 × XGA 1,024 × 1,024 × 1,024 × WXGA 1,280 × 1,280 × 1,280 × 1,360 × SXGA 1,280 × HDTV 1,920 × Vertical (Line) 480 480 400 600 600 768 768 768 768 768 768 768 1,024 1,080 Horizontal frequency (kHz) 31.5 37.5 31.5 37.9 46.9 48.4 56.5 60.0 47.4 47.8 60.3 47.7 64.0 67.5 Vertical frequency (Hz) 60 75 70 60 75 60 70 75 60 60 75 60 60 60 Standard VGA VESA VGA-T VESA Guidelines VESA VESA Guidelines VESA VESA VESA VESA VESA VESA CEA-861* ~ • This TV's PC input does not support Sync on Green or Composite Sync. • This TV's PC VGA input does not support interlaced signals. • Your PC must support one of the above PC input signals to display on the television. • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency. In plug and play, signals with a 60 Hz vertical frequency will be detected automatically. (PC reboot may be necessary.) 14 * The 1080p timing when applied to the HDMI input will be treated as a video timing and not PC timing. This affects Picture settings, Wide Mode settings, and PIP function. To view PC content set Picture Mode to Custom, Wide Mode to Full, and Display Area to Full Pixel.