Sony KDL-55EX621 Additional Information for Using Sony® Wall-Mount Bra - Page 4

3 Install the Base Bracket on the wall. Refer to the Instructions for SU-WL500. 4 Disconnect all the cables from the TV. 5 Detach the Table-Top Stand from the TV. Remove the screws indicated by the arrow marks on the TV. Table-Top Stand attached to TV. Only For KDL-40/32EX521 (Mexico models) Soft cloth Table-Top Stand not attached to TV. Only For KDL-60NX72*, 60EX72* Soft cloth Soft cloth * In the actual model names, the "" indicates numbers and/or characters specific to each model. ✍ • Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on the TV. • When removing the Table-Top Stand from the TV, lay the TV face down on a stable work surface that is larger than the TV. • To prevent damaging the surface of the TV, make sure to place a soft cloth on the work surface. • When lifting or moving the TV, keep a soft cloth underneath to prevent damage. • The number and position of the screws on the rear of the TV differs, depending on the model of TV; be sure to read the operating instructions of your TV. • Be sure to remove the joint when the Table-Top Stand is not attached to the TV. • Be sure the TV is in a vertical position before turning it on. The TV set must not be powered on with the LCD panel face down to avoid uneven picture uniformity. CAUTION • If pressure or shock is applied to the surface of the TV, the TV may break or become damaged. • Lay the TV face down on a stable and level surface with the Table-Top Stand hanging over the edge of the surface. Having the TV face and the base of the Table-Top Stand on the same level surface will create an unstable working condition and can damage the TV. • When detaching the Table-Top Stand from the TV, hold the Table-Top Stand securely with both hands. Additional Information for Using Sony Wall-Mount Bracket (SU-WL500) −  −