Sony KDL V32XBR2 Operating Instructions - Page 43

Other Information Preparation for Wall Mounting Your TV This TV can be installed on a wall by using a wall-mount bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV. Do not remove the Table-Top Stand for any reason other than to wallmount the TV. Sony Wall-Mount Bracket Model SU-WL31 Follow the simple steps below to remove the Table-Top Stand: 1 Disconnect all the cables from the TV. 2 Cover a level and stable surface with a thick and soft cloth. 3 Gently lay the TV, face down, onto the cloth. Make sure the Table-Top Stand is hanging over the edge. 4 Rotate the cable holder 90 degrees, and pull it out completely. [See illustration A] 5 Remove the screws and detach the Table-Top Stand from the TV. [See illustration B] Be sure to hold the Table-Top Stand firmly while removing the last screw. 6 Do not remove any other screws from the TV. For bracket installation, refer to the instruction guide provided by the WallMount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors. Other Information Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children. 43