Sony KDL40S2000 Operating Instructions - Page 44

Other Information Preparation for Wall Mounting the KDL-40S2000 and KDL-46S2000 This TV can be installed on a wall by using a wall-mount bracket (sold separately). Before mounting the TV on a wall, the Table-Top Stand must be removed from the TV. Do not remove the Table-Top Stand for any reason other than to wallmount the TV. Sony Wall-Mount Bracket Models SU-WL51 and SU-PW2 (KDL-40S2000/ KDL-46S2000) Follow the simple steps below to remove the Table-Top Stand: 1 Disconnect all the cables from the TV. 2 Start removing the screws from the ones on top. (See illustration below) Do not remove any other screws from the TV. 3 When screws are removed, lift the TV out. Make sure that you carry out this task with two people. Do not attempt to lift the TV by your self. For bracket installation, refer to the instruction guide provided by the WallMount Bracket model for your TV. Sufficient expertise is required in installing this TV, especially to determine the strength of the wall for withstanding the TV's weight. For product protection and safety reasons, Sony strongly recommends that you use the Wall-Mount Bracket model designed for your TV and the wall-mounting of your TV should be performed by Sony dealers or licensed contractors. Be sure to store the removed screws and Table-Top Stand in a safe place until you are ready to reattach the Table-Top Stand. Keep the screws away from small children. 44