Sony KDL40S504 Operating Instructions - Page 9
Component, Audio Out, Hdmi In 1/2/3, Digital Audio, Out Optical, Cable, Antenna, Pc In, Rgb/audio - picture
UPC - 027242777415
View all Sony KDL40S504 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Item Description 3 COMPONENT IN 2 Component video provides better picture quality than the S Video and composite video. The COMPONENT IN 2 and COMPONENT IN 1 both accommodate for video formats of 1080p, 1080i, 720p, 480p, and 480i as labeled. Audio connection is required for the COMPONENT IN ports, connect audio (L/R). 4 AUDIO OUT (FIX) Connects to the left and right audio input jacks of your audio equipment. You can use these outputs to listen to your TV's audio through your stereo system. 5 HDMI IN 1/2/3 HDMI (High-Definition Multimedia Interface) provides an uncompressed, alldigital audio/video interface between this TV and any HDMI-equipped audio/video equipment, such as a set-top box, DVD player, Blu-ray Disc, and A/V receiver. HDMI supports enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI cable that bears the HDMI logo. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to any HDMI IN (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the AUDIO IN (L/R) jacks below the HDMI IN 1. 6 DIGITAL AUDIO Connects to the optical audio input of a digital audio equipment that is PCM optical OUT (OPTICAL) compatible. 7 CABLE/ ANTENNA RF input that connects to your Cable or over-the-air antenna. 8 PC IN (RGB/AUDIO) Connects to a personal computer's video and audio output connector. Can also be connected to other analog RGB equipment. For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If an adapter is used, connect the adapter to the computer before connecting the HD15-HD15 cable. You may need to adjust the TV settings or your PC's resolution and timing, see page 19 to setup your PC to this TV. 9 VIDEO IN 2 S VIDEO VIDEO/ L (MONO)AUDIO-R Connects to the composite video and audio output jacks on your A/V equipment such as a DVD player or other video equipment. VIDEO IN 2 input is located on the left side panel of the TV. Connects to the S VIDEO output jack of your DVD or other video equipment that has S VIDEO which provides better picture quality than composite video. The S VIDEO does not provide sound; you will need to connect the audio cables. Be sure to refer to the Quick Setup Guide for: • High quality picture performances • Combination of equipment connections • Cable types to use for connection To view 480p, 720p, 1080i, and 1080p formats, an HDMI or Component video (YPBPR) is necessary. Connect your equipment properly and playback the video with capable equipment. This TV displays all picture format types in a resolution of 1,920 dots × 1,080 lines. 9