Sony KDL52VE5 Operating Instructions - Page 7

Getting Started Locating Inputs and Outputs Rear Panel 1 VIDEO IN VIDEO Y SERVICE PB IN (OPTICAL) PR 1 DIGITAL AUDIO OUT L AUDIO R 1 2 AUDIO COMPONENT IN AUDIO OUT (1080p/1080i/720p/480p/480i) (FIX) L AUDIO R 6 2 34 5 AC IN 7 CABLE/ANTENNA 8 Side Panel PC IN RGB 9 0 AUDIO 2 IN IN 3 IN 4 S VIDEO VIDEO L (MONO) AUDIO R 2 VIDEO IN 5 qa Item 1 SERVICE 2 VIDEO IN 1/ COMPONENT IN 1 (1080p/ 1080i/720p/ 480p/480i)/ L-AUDIO-R Description This port is to be used when service is required. This input port can be used as composite video input (VIDEO 1) or as component video input (COMPONENT 1). For composite use, connect the yellow jack to Y/Video for video and use audio L and R for audio signal. For component connection, use Y, PB, PR for video signals and also connect the audio L and R for audio signal. You must configure the input type Component 1 VCR if the input is used as composite or Channels & Inputs component video input. Otherwise Video/Component 1 Picture a black & white or distorted picture Cable/Antenna Cable may occur. Sound Add Digital Channels To configure the input type, press MENU, select Channel menu then select Video/Component 1 to choose Video 1 or Component 1 as shown here. Screen Channel USB Auto Program Manage Channels Manage Inputs Video/Component 1 Component 1 Control for HDMI On Device List Device Auto Power Off Off Video 1 Component 1 Lock TV Auto Power On Off Signal Diagnostics Setup 3 COMPONENT IN 2 4 AUDIO OUT (FIX) Change RETURN Back MENU Exit Component video provides better picture quality than the S Video and composite video. The COMPONENT IN 2 and COMPONENT IN 1 both accommodate for video formats of 1080p, 1080i, 720p, 480p, and 480i as labeled. Audio connection is required for the COMPONENT IN ports, connect audio (L/R). Connects to the left and right audio input jacks of your audio equipment. You can use these outputs to listen to your TV's audio through your stereo system. (Continued) 7