Sony KDP-65XBR2 Primary User Manual (Large File - 14.16 MB) - Page 34
Connecting a Satellite Receiver with a VCR
View all Sony KDP-65XBR2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting Up the Projection TV Connecting a Satellite Receiver with a VCR 1 Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. 2 Connect the CATV cable to the VCR's VHF/UHF IN jack. 3 Using a coaxial cable, connect the VCR's OUT jack to the projection TV's CABLE jack. 4 Using an A/V cable, connect the satellite receiver's Audio and Video OUT jacks to the VCR's Audio and Video IN jacks. 5 Using an A/V cable, connect the VCR's Audio and Video OUT jacks to the projection TV's Audio and Video IN jacks. 6 If necessary, change the video input on your VCR. (For details, see your VCR's instruction guide.) Coaxial cable CATV cable Satellite receiver Satellite antenna cable TV AUDIO-R (red) AUDIO-L (white) VIDEO (yellow) 24 VCR A/V cable ✍ If the peripherals you are connecting have S VIDEO jacks, you can use S VIDEO cables for improved picture quality (compared to combination audio/video cables). Because S VIDEO cables carry only the video signal, you will also need audio cables for sound.