Sony KDS-55A2020 Operating Instructions - Page 14
Connecting the TV, Cable System and VHF/UHF Antenna System, Cable Box/Digital Cable Box and Antenna - picture on and off
UPC - 027242714823
View all Sony KDS-55A2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Getting Started Connecting the TV To display clear crisp pictures, you must connect your TV correctly and select the correct Wide Mode to display the picture in the correct aspect ratio (see "Changing the Wide Screen Mode" on page 25). It is strongly recommended that you connect the antenna/cable input using 75-ohm coaxial cable to receive optimum picture quality signal. A 300-ohm twin lead cable can be easily affected by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm twin lead cable, keep it as far away from the TV as possible. Do not use an indoor antenna, which is especially susceptible to radio noise. You can also connect a variety of optional equipment to your TV (see page 15). For multiple equipment connections, please refer to the separate Quick Setup Guide. Cable System and VHF/UHF Antenna System CATV cable Antenna cable ✍ Press ANT to switch between VHF/UHF and cable. Cable Box/Digital Cable Box and Antenna z To change channels using the cable box, set your TV to channel 3 or 4 depending on the cable box channel output. Use this hookup if ❑ Your cable company scrambles some channels, such as premium channels. Viewing all channels requires a cable box. ❑ You do not intend to hook up any other audio or video equipment to your TV. CATV cable IN OUT Cable box Coaxial cable Antenna cable VHF/UHF CABLE Rear of TV ✍ To set up the TV remote control, see "Programming the Remote Control" on page 26. ✍ Press SAT/CABLE to begin operating the cable box with the remote control (see page 22). The indicator will light up. ✍ Press ANT to switch between VHF/UHF and cable. 14