Sony KDS-60A3000 Operating Instructions - Page 25
Programming the Remote Control, Operating Sony Brand Video Equipment - blinking green light
UPC - 027242712669
View all Sony KDS-60A3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Programming the Remote Control 2 3 2 4 Operating Sony Brand Video Equipment The remote control is preset as indicated below so that you do not need to program the remote control. Sony Equipment BD DVD STB Programmable Code Number 101 (Sony Blu-ray Disc Player) 751 (Sony DVD Player) 801 (Sony Satellite Receiver) Programming Non-Sony Video Equipment Follow the steps below to program your TV's remote control. 1 In the space provided below, write down the three-digit code of your equipment found on the Manufacturer's Codes List on page 26. If more than one code is listed, try entering the code listed first. Code No. 2 Press and hold , or and simultaneously to light the FUNCTION button. 3 Enter the three-digit code using - while the selected button is lit. If the code is not entered within 10 seconds, you must repeat step 2. 4 Press while the FUNCTION button is lit. The selected FUNCTION button will blink twice if your equipment is programmed correctly and five times if it is not. To Confirm the Programming If you can turn on and off the equipment by pressing the green POWER button, then the programming is complete. If not, try the next code listed. ~ • In some cases, you may not be able to program your remote control. If this is the case, use your equipment's own remote control. • Any one of the FUNCTION buttons can be programmed to operate other equipment regardless of the labeling. For example, if programmed with the correct code, can operate DVD/VCR combo equipment. This is useful if your equipment does not match the labeled buttons available. Make note of your equipment's programmed button. • You may program one equipment per FUNCTION button. (Continued) 25 Using the TV Features