Sony KLH-W32/S Protocol Manual - Page 11

Code Table (1-a) [a]Function [b]Range/Switch Code Command Control Enquiry Standby Power On 0x71 Default Input 0x00 Last Memory Yes Yes Enable Enable 0x01 Option1 0x73 Auto Signal Detect 0x00 Off Yes Yes Enable Enable 0x74 HDMI Signal Detect *5 0x01 On 0x00 VIDEO No Yes Disable Enable 0x75 Signal Status *6 0x01 PC 0x00 Stable No Yes Disable Enable 0x01 Unstable/No Signal 0x76 VIDEO Signal Detect 0x00 NTSC No Yes Disable Enable 0x01 PAL/SECAM *1: Transmit the next command 3 seconds Power On and Power Off commands are transmitted. If not,correct data may not be able to be acquired. *2: KLH-W26/W32 does not have this function. *3: This unit automatically detects the input signal. Therefore changing in automatically if not setting a kind of signal. (RGB and Component, PC and VIDEO in HDMI etc) *4: Restricts the following key operations. [Remote Commander] Menu, Picture, Sound, ECO (Power Saving), Sleep, Contrast+/_, Brightness, Chroma, H Shift, V Shift, V size, PAP [Main] Menu *5: HDMI Signal Detect is Enable only when the signal is in Stable. *6: In the case of two windows, returns Signal Status of Active Window. FWD-40LX2F/40LX2X/32LX2F/32LX2X 7 KLH-W32/W26