Sony KP-48S65R Primary User Manual English Español - Page 6

Step 2: Hookup Connecting an antenna/cable TV system without a VCR To cable or antenna Cable (Rear of projection TV) VHF/UHF Although you can use either an indoor or outdoor antenna with your projection TV, we recommend that you connect an outdoor antenna or a cable TV system to get better picture quality. Connecting an antenna Connect your antenna cable to the VHF/UHF antenna terminal. If you cannot connect your antenna cable directly to the terminal, follow one of the instructions below depending on your cable type. A • VHF only or • VHF/UHF or • Cable 75-ohm coaxial cable (Rear of projection TV) VHF/UHF B • VHF only or • UHF only or • VHF/UHF 300-ohm twin lead cable Antenna connector (Rear of projection TV) VHF/UHF C • VHF and • UHF 75-ohm coaxial cable (Rear of projection TV) VHF/UHF e EAC-66 U/V mixer t (not supplied) 300-ohm twin lead cable Notes • Most VHF/ LI IF combination antennas have a signal splitter. Remove the splitter before attaching the appropriate connector. • It you use the L /V mixer, snow and noise may appear in the picture when viewing cable IV channels over 37. To cable box If your cable company requires you to connect a cable box, make the connection as follows: (Rear of projection TV) VHF/UHF Cable IN OUT Cable box To cable box and cable (Rear of projection TV) AUX Cable box 41-CD TO CONVERTER 1 CD-PC)) 75-ohm coaxial cable (not supplied) CATV cable VHF/UHF Pay cable TV systems use scrambled or encoded signals requiring a cable box* in addition to the normal cable connection. * The cable box will be supplied by the cable company. Note • You cannot watch the signal through an AUX connector as a window picture. To cable and antenna CATV cable (Rear of projection TV) AUX TO CONVERTER Antenna cable VHF/UHF 6 -EN Getting Started Note • Do not connect any thing to the It..) this case. \ \ - FR I FR connector in