Sony KP-53XBR25 Operating Instructions - Page 82
Troubleshooting
View all Sony KP-53XBR25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Appendix Troubleshooting Disturbances in picture and sound can often be eliminated by checking the symptoms and following the suggestions listed here. If the problem still cannot be solved, contact your nearest service facility. Symptom No picture (screen not lit), no sound Possible causes and remedies • Make sure POWER is switched on. • Check the power cord connection. • Check that the TVNIDEO and VTR1-2-3 MDP controls are set correctly. • Make sure that the TV/CABLE BOX selector is set to TV. Poor or no picture (screen not lit), good sound • Adjust the picture using the VIDEO screen (pp. 50 - 53). • Check the antenna/cable connections. • Adjust the color registration (pp. 26 - 27). Good picture, no sound No color for color programs Snow and noise only • Press VOLUME + on the projection TV or VOL + on the Remote • Commander. • Press MUTING on the Remote Commander. • Check the MTS setting (p. 58). • Check that the TVNIDEO and VTR1-2-3 MDP controls are set correctly. • Make sure SPEAKER is set correctly (p. 59). • Check the HUE and COLOR settings (pp. 50 - 51). • Check that it is an active or correct channel. • Check the cable setting. • Check the ANT/AUX button setting. • Check antenna/cable connections. sti0rws4444,46; Dotted lines or stripes P43: , CP :.#: Double images or ghosts This is often caused by local interference (for example, cars, neon signs and hairdryers). Adjust the telescopic aerial for minimum interference. ....... Reflections from nearby mountains or buildings often cause this problem. Connecting a highly directional outdoor antenna or a CAN cable may improve the picture. Remote control does not operate • Check the battery in the Remote Commander. No picture and/or sound for the connected equipment • Check that the TVNIDEO button is set correctly. • Check that the connections are properly made. • Check that the power of the connected equipment is turned on. • Check that the connected equipment is set correctly. Try another channel. It could be station trouble. 82VPPendix