Sony KP-57WS510 Operating Instructions - Page 26
Connecting a DVD Player with Component Video Connectors, Your DVD player has component Y, B-Y
View all Sony KP-57WS510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Installing and Connecting the Projection TV Connecting a DVD Player with Component Video Connectors This is the preferred hookup to use if: ❑ Your DVD player has component (Y, B-Y, R-Y) jacks. Disconnect all power sources before making any connections. 1 Using three separate component video cables, connect the DVD player's Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the projection TV. Use the VIDEO IN 5 or 6 connections. ✍ The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled Y, CB and CR, or Y, PB and PR. If so, connect the cables to like colors. 2 Using an audio cable, connect the DVD player's Audio OUT jacks to the projection TV's AUDIO IN jacks. Be sure to use the same row of inputs that you used for the video connection (VIDEO IN 5 or 6). Rear of projection TV DVD player PR VMC-10HG (not supplied) PB Y 26 RK-74A (not supplied) AUDIO-R (red) AUDIO-L (white)