Sony KP-R46CX10 Primary User Manual - Page 28

Troubleshooting Disturbances in picture and sound can often be eliminated by checking the symptoms and following the suggestions listed below. GENERAL CONNECTED EQUIPMENT SYMPTOM CHECK AND ADJUST Poor or no picture (screen not lit), good sound • Adjust PICTURE. • Adjust BRIGHT with the A/V WINDOW buttons. • Check antenna/cable connections. Good picture, no sound • Press VOLUME+. • Release MUTING on the Remote Commander. • Check that the MTS button is set correctly. • Is the SPEAKER selector set to ON? No picture (screen not lit), no sound • Is POWER switched on? Power in outlet? • Check that the TV/VIDEO button is set correctly. No color • Is it a color program? • Adjust COLOR. Snow and noise only • Is it an active or the correct channel? • Check the CABLE selector setting. • Check that the ANT/AUX button is set correctly. • Check antenna connections. :-'f Dottetl lines or - - '- --.',01.-- stripes This is often caused by local interference. (ex. cars, neon signs, hairdryers etc.) Adjust antenna for minimum interference. Reflections from nearby - , • Double images or ghosts mountains or buildings often cause this problem. A highly directional outdoor antenna or CATV cable may improve the picture. Try another channel. It could be station trouble. SYMPTOM No picture and/or sound for the connected equipment CHECK AND ADJUST • Check that the TV/ VIDEO button is set correctly. • Are the connections made firmly? • Is the power of the connected equipment turn on? • Is the connected equipment set correctly? If the problem still cannot be solved, contact your nearest service facility. Sony Corporation Printed in Japan