Sony KV-24FS100 Operating Instructions - Page 21
TV, Satellite Receiver, and VCR - remote
View all Sony KV-24FS100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
TV, Satellite Receiver, and VCR Satellite antenna cable 4 1 Connecting Your TV From cable/ antenna 2 VCR Rear of TV Satellite Receiver 5 Video (yellow) 3 Audio L (white) Audio R (red) 1 Connect the cable from your satellite antenna to SATELLITE IN on the satellite receiver. 2 Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR. 3 Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV. 4 Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your satellite receiver to AUDIO and VIDEO IN on your VCR. 5 Using Audio/Video cables (not supplied), connect AUDIO and VIDEO OUT on your VCR to AUDIO and VIDEO IN on your TV. To view from the satellite receiver or VCR, select the video input to which your satellite receiver or VCR is connected by pressing on the remote control. 9