Sony KV-30HS510 Operating Instructions - Page 32

Watch the VCR

Page 32 highlights

SETUP Notes on Using This Connection To Do This ... Do This ... Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration). The VCR must be turned on and set to the satellite receiver's line input. Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected (VIDEO 1 in the illustration). Set up the TV remote control to operate the satellite receiver or VCR If you have a non-Sony VCR or satellite receiver, you must program the remote control. See "Programming the Remote Control" on pages 43-44. Activate the TV remote For the satellite receiver, press SAT/CABLE FUNCTION. For the VCR, open the control to operate the satellite outside cover, as shown on page 42. Then set the A/V slide switch to the receiver or VCR position you programmed for the VCR. Control satellite receiver and See "Operating a Satellite Receiver" on page 62 and "Operating a VCR" on VCR functions with the TV page 62. remote control Label video inputs to easily See the instructions for setting up Video Labels on page 78. identify equipment connected to the TV Setup SETUP SETUP SETUP SETUP 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94

31
SETUP
Setup
SETUP
SETUP
SETUP
SETUP
Notes on Using This Connection
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the VCR input (VIDEO 1 in the
illustration).
The VCR must be turned on and set to the satellite receiver
s line input.
Watch the VCR
Press
TV/VIDEO
repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See
Programming the Remote Control
on pages 43-44.
Activate the TV remote
control to operate the satellite
receiver or VCR
For the satellite receiver, press
SAT/CABLE FUNCTION
. For the VCR, open the
outside cover, as shown on page 42. Then set the A/V slide switch to the
position you programmed for the VCR.
Control satellite receiver and
VCR functions with the TV
remote control
See
Operating a Satellite Receiver
on page 62 and
Operating a VCR
on
page 62.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on page 78.