Sony KV-34XBR910 Operating Instructions - Page 42
Setting Up the Channel List, Using Auto Program, Using Auto, Program - reset
View all Sony KV-34XBR910 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
SETUP Setup SETUP Setting Up the Channel List After you finish connecting your TV, you need to run Auto Setup to set up your channels. The Auto Program screens appear when you turn on your TV for the first time after hooking it up. Using Auto Program z To exit the Tilt Correction and Vertical Correction screens, press the MENU button. z For more details on using Auto Program, see page 84. For more details on using Tilt Correction and Vertical Correction, see pages 89-90. To run Auto Program the first time you turn on your TV 1 Press POWER to turn on the TV. The Initial Setup screen appears. 2 Using the joystick on the remote control, move the highlight to the desired language, then press to select that language. 3 The next screen instructs you to connect your cable/antenna. Check that you've connected your signal source as described on pages 16 to 22. To start Auto Program, move the joystick to highlight Yes and then press . Auto Program automatically creates a list of receivable channels. When Auto Program is finished, the Tilt Correction screen appears. 4 Move the joystick B b to correct any tilt of the picture. You can choose a correction between +7 and -7. When finished, press . The Vertical Correction screen appears. 5 Move the joystick V v to make a vertical correction to the picture. You can choose a correction between +5 and -5. When finished, press . The lowest numbered channel is displayed. To reset the TV to factory settings 1 Press POWER to turn on the TV. 2 Hold down RESET on the remote control. 3 Press TV POWER on the TV. (The TV will turn itself off, then back on.) 4 Release RESET. SETUP SETUP SETUP 41