Sony KV-36FS210 Operating Instructions - Page 21

Connecting Your TV Cable Box and Cable ✍ DIGITAL CABLE BOX AND INTERACTIVE SERVICES USERS: Do not use this connection. The TO CONVERTER jack is not compatible with digital boxes or interactive services such as Pay Per View. Use this connection if you subscribe to a cable system that scrambles some channels (pay channels) but not all of them. This setup allows you to use the remote control to: ❏ change channels through your cable box when you are receiving a scrambled signal ❏ change channels through your TV This connection also allows you to use the PIP feature when you are viewing unscrambled channels coming directly into your TV from your cable. Scrambled signals coming through the cable box cannot be viewed in PIP. For more information on the PIP feature, see page 24. Cable box 3 Coaxial cable 2 75-ohm Coaxial cable 1 CATV cable (unscrambled channels) Rear of TV 1 3 S VIDEO VIDEO L (MONO) R 1 Connect the coaxial cable from your cable service to the VHF/UHF jack on your TV. 2 Using a coaxial cable (not supplied), connect the IN jack on your cable box to the TO CONVERTER jack on your TV. 3 Using a coaxial cable (not supplied), connect the OUT jack on your cable box to the AUX jack on your TV. Using your TV with this connection This connection allows you to do the following: ❏ Program your Sony remote control to operate your cable box (see page 5). ❏ To activate your remote, press to operate your cable box and then use the 0 9 buttons or CH+/- buttons to change the channels. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 31). ❏ Press to switch back and forth between VHF/UHF (local channels or unscrambled) and AUX (cable system or pay channels). 13